|
Mitsubishi Delica Owners Club UK™ Mitsubishi Delica L300, L400 and D:5 Owners Club
|
View previous topic :: View next topic |
Author |
Message |
peter_rookie
Joined: 27 Oct 2020 Posts: 157 Location: Vienna, Austria
|
Posted: Wed Nov 08, 2023 11:20 Post subject: Diff sizes L400 S1, S2 |
|
|
hi All,
I would have a chance to grab a PD5W Delica, European version 4D56 engine but rotted van. all mechanical stuff still good.
so I wondered if grabbing it and swapping the diffs incl. an LSD rear diff would work at all. the ratio is 4,636 vs my stock 4,875 which I would like to see my highway revs going down.
alternatively I have access to a S2 PD8W without LSD but 4,636 ratio.
these are the Mitsu part numbers of crown wheel and pinion sets for the 3 cars retrieved from partsouq.com using the VIN. very different even for both 4,636 versions of the front diff.
PD5W European PD8W S2 2,8td PE8W my S1 2,8td
Front 4,636 4,636 4,875
MR179199 MR124859 MB831031
Rear MR208659 MR162750 MB527147
does anyone have a source where you would find actual dimensions, I found that there are different diff sizes from 8 to 9" or how many splines the pinions have etc., would like to understand if they are interchangeable.
altough when getting the donor cars in whole I might have to swap entire axles and drive trains to make it work but that would be least preferred.
thx
Peter |
|
Back to top |
|
|
Google Sponsor
|
Posted: Wed Nov 08, 2023 11:20 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|