|
Mitsubishi Delica Owners Club UK™ Mitsubishi Delica L300, L400 and D:5 Owners Club
|
View previous topic :: View next topic |
Author |
Message |
anothervaughany
Joined: 11 Feb 2023 Posts: 1 Location: Halesowen
|
Posted: Sat Feb 11, 2023 15:03 Post subject: Roof Bars for a L400 Pop Top Conversion |
|
|
Hi Folks, I've bought a L400 a few months ago that was converted into a camper complete with a fibreglass poptop roof. I'd like to get some roof bars installed so that I can strap a couple of surf boards (i.e. nothing too heavy) onto the roof. Has anyone done this before? If so, any recommendations? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Google Sponsor
![](images/google_avatar.png)
|
Posted: Sat Feb 11, 2023 15:03 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Lewis Site Admin
![](images/avatars/122621599354eaffc7d2989.gif)
Joined: 25 May 2006 Posts: 16299 Location: Huddersfield
|
Posted: Sat Feb 11, 2023 19:14 Post subject: |
|
|
I greatly doubt that a "Poptop' roof will have sufficient strength to support roofbars with luggage on them.
They are more likely going to distort the roof panel, so it will not sit properly on the upper sides of the van sidewallks.
The L400 uses gutter mounted roof and light bars, but a poptop one would need to be bolted through the roof panel itself. _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
andyman
Joined: 08 Dec 2012 Posts: 5602 Location: Penrith
|
Posted: Sun Feb 12, 2023 0:50 Post subject: |
|
|
,As Lewis indicates, the fibre glass of a pop-top roof will be pretty thin, but as you only intend to carry lightweight surfboards, it might be possible, but the the biggest stress may be due to the 'wing effect' of the boards at motorway speeds. I suggest you reinforce mounting points with additional fibre glass matting/resin, and then spread the loading of the bar fixing points with large stainless steel washers or plates, under, and on top of the pop-top. _________________ Andy C L300 Super Exceed - over 100 smiles per gallon! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
PinkPig Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
![](images/avatars/17155620605885ec6e3ce54.jpg)
Joined: 05 Aug 2004 Posts: 2720 Location: Southampton, UK
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|