Yellow diamond : click here

Mitsubishi Delica Owners Club UKô
Mitsubishi Delica L300, L400 and D:5 Owners Club
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
CalendarCalendar  dynamic online chat serviceChatrooms   Delica Club ShopClub Shop  MDOCUK Classified Ads serviceClassified Ads
MDOCUK home pageMDOCUK Home  Yellow Diamond ClubsYellow Diamond Clubs  Delica Club (CA)Delica Club (CA)  Delica Club (AUS)Delica Club (AUS)

Advance piston stop plate leaking.


 
Post new topic   Reply to topic    Mitsubishi Delica Owners Club UKô Forum Index -> Delica L400 Technical Forum
View previous topic :: View next topic  
Author Message
sir naggedalot



Joined: 07 Sep 2010
Posts: 190
Location: Southampton

PostPosted: Tue Mar 30, 2021 22:32    Post subject: Advance piston stop plate leaking. Reply with quote

My pumps leaking at the engine block side, There is a blanking plate against which the advance piston stops against.
Just wondering if it's possible to take the aircon compressor off and gain access from the bottom?

Shame its not as easy as this : bongo ve bosh pump seal
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Tue Mar 30, 2021 22:32    Post subject: Google Ads keep this community free to join!


Back to top
sir naggedalot



Joined: 07 Sep 2010
Posts: 190
Location: Southampton

PostPosted: Sun May 02, 2021 22:39    Post subject: Reply with quote

I'll post this as it may be of interest at some point.
I wouldn't be able to access the advance piston plate if I removed the aircon pump and bracket.
Fixed the piston seal only for the head seal to fail minutes later, do both 👌
Back to top
View user's profile Send personal message
mark3



Joined: 29 Nov 2009
Posts: 909
Location: Rainham Village, Essex

PostPosted: Mon May 03, 2021 11:04    Post subject: Reply with quote

I've replaced loads of these inner timing cylinder cover seals and always found removing the pump is the easiest way to do it but I should add pump removal and refit on a Deli only used to take me an hour  Very Happy
_________________
Back to top
View user's profile Send personal message Visit poster's website
sir naggedalot



Joined: 07 Sep 2010
Posts: 190
Location: Southampton

PostPosted: Mon May 03, 2021 15:42    Post subject: Reply with quote

I'm getting the practice in,not down to a hour but I always seam to find corroded cooling lines ect. This one took me good part of the day to get in and out but I was addressing lots of coolant leaks.
I didn't have the faceplate seal if that's what it's called, and it looked like it was shrunk but I had to use it and unfortunately it looks like all the diesel leaks have gone as have the coolant line leaks but there's a steady drip of engine oil now from the face plate..😬

Is there two seals on the pumps face plate? One on the pump side and a bigger outer one that's visible and faces onto the timing case? I'm hoping it'll be this one.
Back to top
View user's profile Send personal message
sir naggedalot



Joined: 07 Sep 2010
Posts: 190
Location: Southampton

PostPosted: Mon May 03, 2021 16:44    Post subject: Reply with quote

Now I know that the vacuum and oil pump bolts went back in the right holes and the bottom pump one that's unable to be removed because of the půlly, but I'm wondering about the test now.
Embarassed
Back to top
View user's profile Send personal message
Display posts from previous:   
Post new topic   Reply to topic    Mitsubishi Delica Owners Club UKô Forum Index -> Delica L400 Technical Forum All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group