View previous topic :: View next topic |
Author |
Message |
rekab6969
Joined: 13 May 2019 Posts: 48 Location: Kelsale, Suffolk
|
Posted: Tue Jul 09, 2019 21:38 Post subject: Inlet manifold bolts.. Torque settings ? |
|
|
Hi Guys,
Just putting my head back on 4m40 and struggling to find torques specs for inlet manifold bolts..
Thanks,
db. |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Jul 09, 2019 21:38 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
YOZA
Joined: 07 Mar 2005 Posts: 2423 Location: The centre of the universe
|
Posted: Wed Jul 10, 2019 11:22 Post subject: |
|
|
That is odd, every listing except manifold bolts, I would use the torque table and see what is embossed on the bolt head and go with that.
Although when I've done this job I've never torqued the manifold bolts as they will differ to man/spec if you use anything other than OEM gaskets, which I didn't. _________________ Artificial intelligence is no match for natural stupidity.... |
|
Back to top |
|
|
rekab6969
Joined: 13 May 2019 Posts: 48 Location: Kelsale, Suffolk
|
Posted: Wed Jul 10, 2019 12:09 Post subject: Thanks Yosa. |
|
|
Thanks Yosa,
Just being over cautious as I recently read a post where a guy had snapped an inlet bolt, that along with steel bolts going into Ali i thought I'd torque them in.
I went with Man/spec in the end.. Man that feel tight enough.
all the best,
db. |
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16298 Location: Huddersfield
|
Posted: Wed Jul 10, 2019 12:19 Post subject: |
|
|
Should be the same as for the 4D56, which is 27Nm.
HTH _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
|