Mitsubishi Delica Owners Club UK™

sl8ter · Joined: 03 Aug 2010 Posts: 326 Location: Dumbarton

Will these be okay with 235x75x15s on my L400 ?

Google · Sponsor

Lewis · Posted: Sun Aug 19, 2018 9:40 Post subject:

Yes. You can go up to 30x9.5 on the 15" rim without requiring any modification to the wheel arches.

HTH
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

sl8ter · Joined: 03 Aug 2010 Posts: 326 Location: Dumbarton

Thanks lewis

Lewis · Posted: Sun Aug 19, 2018 14:01 Post subject:

I forgot to mention that the offset on the MOJO's is zero, so the tyres will stick out sideways 22mm more, giving a 44mm wider wheelbase. So check the side clearance of the tyres against the wheel arch, and alter the turning circle adjustment nut if required.

NB: They are also steel wheels, so you will most likely need a different set of wheel nuts.
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

sl8ter · Joined: 03 Aug 2010 Posts: 326 Location: Dumbarton

I never thought about new wheel nuts .I was also thinking 15x10 et 32

Lewis · Posted: Sun Aug 19, 2018 18:10 Post subject:

With a 10" wide wheel you will have to put extanded wheel arches on.

NB: It is illegal to have tyres that do not have the tread fully covered over at the top.

HTH
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

sl8ter · Joined: 03 Aug 2010 Posts: 326 Location: Dumbarton

Iv just spotted a set of 15x8 et22 cb 110.5 will these be okay and thanks lewis for you help

Lewis · Posted: Tue Aug 21, 2018 9:28 Post subject:

Yes; Don't forget to make sure you get the right nuts.

These are the standard 'Collared' nuts used on the Deli Alloys, Which have a parallel hole in them:-

Other wheels may need tapered nuts.

HTH
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

sl8ter · Joined: 03 Aug 2010 Posts: 326 Location: Dumbarton

That's great and I take it the m12.1.5 are the right size nuts and thank once again

Lewis · Posted: Tue Aug 21, 2018 11:51 Post subject:

Yes. :D
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス