Mitsubishi Delica Owners Club UK™

PeteS · Joined: 16 Jun 2014 Posts: 34 Location: Salisbury

Does anyone know where i can get a new master cylinder or repair kit.
I've already done a search and come across big red but they don't have the right bore size kit. They have 22.2mm size and i have stamped on the side 15/16 which i think is 23.8mm
Milners don't do it either. Is there a compatible vehicle?

This is what i;ve found so far.
http://www.ebay.co.uk/itm/321519366294?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
or
http://www.ebay.co.uk/itm/131212571867?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Does anyone know the part number/ s

cheers

Google · Sponsor

PinkPig · Posted: Tue Oct 21, 2014 9:32 Post subject:

Try these links:-

The numbers starting MD are the mitsu part numbers

http://translate.google.com/translate?hl=ru&sl=ru&tl=en&u=http://mitsubishi.epcdata.ru/delica_star_wagon/

http://translate.google.com/translate?hl=ru&sl=ru&tl=en&u=http://mitsubishi.epcdata.ru/delica_star_wagon/

http://translate.google.com/translate?hl=ru&sl=ru&tl=en&u=http://mitsubishi.epcdata.ru/delica_star_wagon/

Possibly the same master cylinder as the UK spec/sold 2WD L300 van, so might be worth getting a parts place to look that up instead.
_________________
The PINK PIG!
1988 Delica L300 Star Wagon 2.5TD 5sp Manual.
Instagram: https://www.instagram.com/__PinkPig___/
A never ending camper/restoration project
Project 1 - Pop-top camper conversion 2011-2015
Project 2 - Campervan the sequel - 2016 restoration, welding, respray, new interior, vertical pop...

ciaran15 · Joined: 23 Mar 2010 Posts: 225 Location: Omagh

Is your master cylinder leaking mine has been leaking for a while now need to get it fixed also. Seems quite common on the L300

PeteS · Joined: 16 Jun 2014 Posts: 34 Location: Salisbury

Yes, its the master cylinder leaking. I took the dash board off to get at the back of the washer jets and wipers and to check for other leaks when i discovered it.
I'm struggling to find a replacemet at the moment. I've been offered one for 65 quid but the guys not sure if its the correct one
http://i1255.photobucket.com/albums/hh626/plwsochon/DSCF1652_zpsd1caf960.jpg

ciaran15 · Joined: 23 Mar 2010 Posts: 225 Location: Omagh

Did you manage to get the leaking master cylinder sorted yet. I'm sorting out my L300 at the minute to get her back on the road I have the exact same problem so I'm thinking I might as well sort that out also.....

ciaran15 · Joined: 23 Mar 2010 Posts: 225 Location: Omagh

Oh good informative picture by the way 8-)

PeteS · Joined: 16 Jun 2014 Posts: 34 Location: Salisbury

Yeah. Well, kind of? I've got a new replacement to install but the 2 white unions on the top that connect to the reseviour are facing in the wrong direction and i'm not sure what to do about it. I've spoken to the supplier and they have said they can be turned around to the correct orientation but i've tried this by hand and they don't budge. So what to do?

1. turn with some pliers and hope the plastic doesn't break?
2. return to supplier to get a replacement?
3. Get longer pipes?
4. anyone else had this issue who knows what to do?

I'll post a pick of the problem when photo bucket is not down for maintenance.

PinkPig · Posted: Thu Nov 06, 2014 15:32 Post subject:

Sounds like you have one set up for left hand drive mounting?

Maybe try to turn them on the old one so it doesn't matter if they break?
_________________
The PINK PIG!
1988 Delica L300 Star Wagon 2.5TD 5sp Manual.
Instagram: https://www.instagram.com/__PinkPig___/
A never ending camper/restoration project
Project 1 - Pop-top camper conversion 2011-2015
Project 2 - Campervan the sequel - 2016 restoration, welding, respray, new interior, vertical pop...

PinkPig · Posted: Thu Nov 06, 2014 15:32 Post subject:

To test how much force you need that is...
_________________
The PINK PIG!
1988 Delica L300 Star Wagon 2.5TD 5sp Manual.
Instagram: https://www.instagram.com/__PinkPig___/
A never ending camper/restoration project
Project 1 - Pop-top camper conversion 2011-2015
Project 2 - Campervan the sequel - 2016 restoration, welding, respray, new interior, vertical pop...

PeteS · Joined: 16 Jun 2014 Posts: 34 Location: Salisbury

voila, can you guess which method i chose???????
I just hope its the correct one now i've messed with it.
http://i1255.photobucket.com/albums/hh626/plwsochon/DSCF1657_zps8c6bef0c.jpg

PinkPig · Posted: Fri Apr 10, 2015 22:08 Post subject:

Thanks for the help finding the parts.

I've posted full details here,
http://www.MDOCUK.co.uk/forums/viewtopic.php?p=365068#365068

but same as you I got one for a left hand drive from Germany. Mine was made by Brembo, cost a little more, but under a hundred instead of over 500 from Mitsu! The Nissin one that you seem to have wasn't available in stock anywhere I could find.

Fitted and working - MOT again on Tuesday...getting there!
_________________
The PINK PIG!
1988 Delica L300 Star Wagon 2.5TD 5sp Manual.
Instagram: https://www.instagram.com/__PinkPig___/
A never ending camper/restoration project
Project 1 - Pop-top camper conversion 2011-2015
Project 2 - Campervan the sequel - 2016 restoration, welding, respray, new interior, vertical pop...