Mitsubishi Delica Owners Club UK™

[floyd9t8]

I have taken the back seats out of my 1995 Delica Space Gear in the past but was wondering how easy it is to remove the middle section of seats? Also where the necessary bolts are.
Cheers.

[Google]

[Lewis]

Press the lever to let the seat base fold up and push the seat forward.

Look at the rear end of the tracks, where you will spot two 'D' shaped carpet plugs, on the opposite side to the sliding door.

Lift these out and you will find the bolts holding the tracks down, undo those (14mm Socket).

Next push the seat as far back as possible and lift up the carpet behind the front seat, to reveal a single bolt at the front end of each track remove those.

Now brace yourself, as the seats weight 36Kg each, lift the seat up and backwards to lift it out of the plastic trim it is sat in.

Turn the seat on its side, so the track base is facing you and remove the plastic end cap from the track.

Next remove the bolt through the back end of the track.

Lift up the lever that allows the seat to slide back and forward and slide the track forward to release it from the seat base, that wil reduce the weight enough to let you lift the seats out of the side door easier.

HTH
_________________


Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

[Rusty]

A simple great answer as usual Lewis. Worthy of the FAQ section I think...
_________________