Mitsubishi Delica Owners Club UK™

ruffgeezer · Joined: 06 Aug 2010 Posts: 42 Location: South Lincs

In this picture, my 2.8 leaks from the base of the pipe at 3, what appears to be an O ring? I was wondering if anyone else had a leak there and if it was a failed seal or a corroded 'stat housing.

Google · Sponsor

Lewis · Posted: Tue Sep 14, 2010 8:59 Post subject:

Here's a photo of the 2.8TD 4M40 engine Thermostat housing:-

The Mitsubishi Part number is:-

MD030763 - 'O' Ring, Water Cooling Line. Qty 2.

You can also get boxes of mixed 'O'ring sets from your local Halfords branch.

HTH
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

ruffgeezer · Joined: 06 Aug 2010 Posts: 42 Location: South Lincs

Yeah I've got plenty of O-rings at work, it was just the best way of getting the housing off since it has 2 solid pipes going into it?

Tinca · Posted: Sun Sep 19, 2010 18:06 Post subject:

With much cussing & swearing! Seriously tho it does come off with a lot of jiggery pokery but it is tight.

I did mine yesterday the O rings I had were too small so I will have to phone the dealers 2morra and get some real ones.

New turbo cooling Banjo washers are a good Idea also (but I had those in stock - copper 12mm i.d.
_________________
Happiness is being owned by a Jack Russell Terrier!

Tinca · Posted: Mon Sep 20, 2010 12:00 Post subject:

£2.99 each for 'O' rings :?

Still I need them sad9

_________________
Happiness is being owned by a Jack Russell Terrier!