Mitsubishi Delica Owners Club UK™

Lou Martin · Joined: 05 Aug 2006 Posts: 62 Location: Nr Stevenage, Herts

Any one got ant idea what the thread pitch on a L400 wheel stud is I have some non standard alloys and want some locking wheel nuts i know thestuds are 12mm X WHAT (1.25 or 1.5)

thanks in advance
Lou

Google · Sponsor

BadgeStar · Joined: 20 Aug 2006 Posts: 245 Location: STAFFORD UK

I'm fairly sure they are 12 X 1.5 for L300, L400, Pajero etc.
Perhaps someone else can confirm this?

Barry.
_________________
'93 L300 Exceed ........'THE BLACK VAN'.
'89 L300 Manual ............'JUST 4 FUN'.

billy bob · Posted: Thu Apr 19, 2007 18:28 Post subject:

12x1.5

L400
_________________
Andy
94 blue over gray lwb royal exceed.
95 black mit's FTO gpx modding into plaything
97 red/black/silver honda CBR 1000 F
96 blue fiesta ghia auto

Lou Martin · Joined: 05 Aug 2006 Posts: 62 Location: Nr Stevenage, Herts

Thanks for that guys Mad

:D :D

Lou Martin · Joined: 05 Aug 2006 Posts: 62 Location: Nr Stevenage, Herts

Lloydy · Joined: 03 May 2007 Posts: 21 Location: South Wales

My beast came over without the locking nut adapter (and without a torch and a jack too Evil or Very Mad

)

I went to halfords, and picked up a new set for a shogun, and they worked fine.

By the way, if you ever lose the adapter, a helpgul guy in ATS took off all four of mine and only charged me a tenner. His trick was to hammer on an undersized socket, then simply undo the bolts. Laughing