View previous topic :: View next topic |
Author |
Message |
Hansfreekit
Joined: 18 Sep 2020 Posts: 5 Location: Bethnal Green and Bow
|
Posted: Sun Jul 24, 2022 11:33 Post subject: Front Bonnet Air Inlet Garnish Clips? PD6W |
|
|
Hi all,
Yes, anyone ever replaced these attachment clips either end of the crescent shaped plastic moulding at the top of the bonnet before windscreen. Both ends flapping in the wind.
The clips are white, plastic, and have like a T-shaped top and a trim clip bottom. ..... Before I get the superglue out. |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sun Jul 24, 2022 11:33 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16298 Location: Huddersfield
|
Posted: Sun Jul 24, 2022 15:03 Post subject: |
|
|
Do you mean these:-
Or the ones for retaining the rubber seal:-
_________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
Hansfreekit
Joined: 18 Sep 2020 Posts: 5 Location: Bethnal Green and Bow
|
Posted: Mon Jul 25, 2022 8:09 Post subject: |
|
|
Thank you - but no. they fit into a square hole - 5mmx5mm approx - they have a flat strip top which takes two small screws into the hood - white plastic
I'd post a picture but the site won't let me |
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16298 Location: Huddersfield
|
Posted: Mon Jul 25, 2022 9:20 Post subject: |
|
|
Ah you mean these:-
Different part numbers for each end, with a square plastice insert for a screw to go through.
I was thrown by your 'Trim clip bottom' description.
HTH _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
Hansfreekit
Joined: 18 Sep 2020 Posts: 5 Location: Bethnal Green and Bow
|
Posted: Mon Jul 25, 2022 11:33 Post subject: |
|
|
Bingo. Exactly. Many thanks.
Although it still baffles me what holds the t-shaped one when inserted into hole. Does the bottom picture clip fit onto the t-shaped one? What a faff! |
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16298 Location: Huddersfield
|
Posted: Mon Jul 25, 2022 11:39 Post subject: |
|
|
Place T bit into square bit, fit a screw through bottom of square bit into T bit it and then push square bit into square hole in metal below it. _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
Hansfreekit
Joined: 18 Sep 2020 Posts: 5 Location: Bethnal Green and Bow
|
Posted: Mon Jul 25, 2022 12:20 Post subject: |
|
|
Brilliant, thanks, does the bottom part (s) contain two of same piece - for each end? So you only have to order one? - If you know what I mean. |
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16298 Location: Huddersfield
|
Posted: Mon Jul 25, 2022 12:25 Post subject: |
|
|
Yes.
See:- https://www.ebay.co.uk/itm/274329061403 _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
Hansfreekit
Joined: 18 Sep 2020 Posts: 5 Location: Bethnal Green and Bow
|
Posted: Mon Jul 25, 2022 12:37 Post subject: |
|
|
ordered from Amayama. Thanks again for your assistance. |
|
Back to top |
|
|
|