Mitsubishi Delica Owners Club UK™

peter turner · Joined: 03 Sep 2019 Posts: 29 Location: Bridge of Weir

Hi all
Have just replaced my starter motor on my 2.8 Delica, I removed
the heater hoses to gain better access.
I also cut the two hoses that supply the rear heater matrix as it didn't give any heat
to the rear
My big error was I didn't note what hoses went where
Would any members be kind enough to give me a simple
idiot guide on where each hose goes
The hose that travels from behind the engine is my start point
and the hose that comes down from the air bleed bolt is my other start point
A picture would be great a drawing even better
Peter

Google · Sponsor

Lewis · Posted: Sun Jan 23, 2022 13:55 Post subject:

Try this worshop manual, in my box folder. even though is is a different engine it uses the same pipe system, etc.

The aircon tests, etc are also the same as for the 4M40.

https://app.box.com/file/855702329870
_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス

peter turner · Joined: 03 Sep 2019 Posts: 29 Location: Bridge of Weir

Hi Lewis
Thanks for your response to my post.
Unfortunately I couldn't open the link you sent me,
I'm a little poor on tech
Thanks Peter

Lewis · Posted: Sun Jan 23, 2022 16:06 Post subject:

PM me your email and I will send you the file direct. Very Happy

_________________

Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス