4x4 & MPV Driver - 40% subscription discount

Mitsubishi Delica Owners Club UK™
Mitsubishi Delica L300, L400 and D:5 Owners Club
 
 FAQFAQ   SearchSearch   Watched TopicsWatched Topics   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your personal messagesLog in to check your personal messages   Log inLog in 
CalendarCalendar  dynamic online chat serviceChatrooms   Delica Club ShopClub Shop  MDOCUK Classified Ads serviceClassified Ads
MDOCUK home pageMDOCUK Home  Yellow Diamond ClubsYellow Diamond Clubs  Delica Club (CA)Delica Club (CA)  Delica Club (AUS)Delica Club (AUS)

Inlet manifold bolts.. Torque settings ?


 
Post new topic   Reply to topic    Mitsubishi Delica Owners Club UK™ Forum Index -> Delica L400 Technical Forum
View previous topic :: View next topic  
Author Message
rekab6969



Joined: 13 May 2019
Posts: 48
Location: Kelsale, Suffolk

PostPosted: Tue Jul 09, 2019 21:38    Post subject: Inlet manifold bolts.. Torque settings ? Reply with quote

Hi Guys,

Just putting my head back on 4m40 and struggling to find torques specs for inlet manifold bolts..  

Thanks,

db.
Back to top
View user's profile Send personal message
Google
Sponsor





PostPosted: Tue Jul 09, 2019 21:38    Post subject: Google Ads keep this community free to join!


Back to top
YOZA



Joined: 07 Mar 2005
Posts: 2423
Location: The centre of the universe

PostPosted: Wed Jul 10, 2019 11:22    Post subject: Reply with quote

That is odd, every listing except manifold bolts, I would use the torque table and see what is embossed on the bolt head and go with that.

Although when I've done this job I've never torqued the manifold bolts as they will differ to man/spec if you use anything other than OEM gaskets, which I didn't.
_________________
Artificial intelligence is no match for natural stupidity....
Back to top
View user's profile Send personal message
rekab6969



Joined: 13 May 2019
Posts: 48
Location: Kelsale, Suffolk

PostPosted: Wed Jul 10, 2019 12:09    Post subject: Thanks Yosa. Reply with quote

Thanks Yosa,

Just being over cautious as I recently read a post where a guy had snapped an inlet bolt, that along with steel bolts going into Ali i thought I'd torque them in.

I went with Man/spec in the end..  Man that feel tight enough.  Smile

all the best,

db.
Back to top
View user's profile Send personal message
Lewis
Site Admin


Joined: 25 May 2006
Posts: 16291
Location: Huddersfield

PostPosted: Wed Jul 10, 2019 12:19    Post subject: Reply with quote

Should be the same as for the 4D56, which is 27Nm.

HTH
_________________


Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス
Back to top
View user's profile Send personal message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Mitsubishi Delica Owners Club UK™ Forum Index -> Delica L400 Technical Forum All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


All contents © Hobson's Choice IT Solutions Ltd 1997 on
Powered by phpBB © 2001, 2005 phpBB Group