Posted: Fri Apr 26, 2019 19:39 Post subject: L400 Front disk brake carrier
Hi all, fitting new disks and pads today and one of the slider bolts has sheared off in the carrier.
I've left it soaking in wd40 overnight and I'll see if I can get it out in the morning.
I'm panicking a bit as we're going away Sunday for a few days!!
Has anyone by any chance got one spare a reasonable distance from Wrexham.
Also does anyone know the part number?
- Front off-side L400 '94.
TIA
Joined: 07 Mar 2005 Posts: 2423 Location: The centre of the universe
Posted: Sat Apr 27, 2019 7:51 Post subject:
If you have the tools, do as I did - drill and tap an m5 thread down the centre of the slider bolt.
Then chop the end off a long m5 coach bolt and screw it in to the slider stub, now place a penny washer over the threaded coach bolt and use a m5 nut to draw the slider stub out.
People have drilled the remainder out of the carrier but the chances of damaging the bore is high. _________________ Artificial intelligence is no match for natural stupidity....
Joined: 25 May 2006 Posts: 16296 Location: Huddersfield
Posted: Sat Apr 27, 2019 11:23 Post subject:
Part number:- MB858394
Same part number for both sides. _________________
Copyright is retained for all my photos. Please don't copy them without asking permission Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow! ルイス
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum