View previous topic :: View next topic |
Author |
Message |
richard vankoghnett
Joined: 18 Jan 2019 Posts: 3 Location: Fort Erie, Canada
|
Posted: Sat Jan 19, 2019 1:19 Post subject: back window |
|
|
Hi all, I have just purchased a 1993 JB 500. After purchasing i found out the back window is broken. what do you think my chances are of finding a new window? are there other options out there?
thanks Richard |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sat Jan 19, 2019 1:19 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
YOZA
Joined: 07 Mar 2005 Posts: 2423 Location: The centre of the universe
|
Posted: Sat Jan 19, 2019 17:50 Post subject: |
|
|
If it was me I would use the original fixings and seal then simply cut a new piece from a sheet of acrylic of the same thickness and tint using the damaged one as a template.
Acrylic is a nice material to work with and if you use the correct blade in your jigsaw it is surprising what you can achieve.
The seal on that model is large and wide, it will hold the Acrylic nicely. _________________ Artificial intelligence is no match for natural stupidity.... |
|
Back to top |
|
|
richard vankoghnett
Joined: 18 Jan 2019 Posts: 3 Location: Fort Erie, Canada
|
Posted: Sat Jan 19, 2019 19:35 Post subject: |
|
|
okay thanks. I was not aware it was just a flat piece of sheet. i thought it was heat formed. I do not pick it up for a week, so have only seen pictures. It is not that hard to do a heat form. as long as i could find an oven it would fit in. thought maybe there is a used place to get one. they must be too old and rare. Thanks again Richard |
|
Back to top |
|
|
Deker
Joined: 08 Mar 2008 Posts: 3833 Location: Borehamwood
|
Posted: Sat Jan 19, 2019 20:22 Post subject: |
|
|
richard vankoghnett wrote: |
okay thanks .. i thought it was heat formed . It is not that hard to do a heat form
as long as i could find an oven it would fit in |
Generally, plastics are heated with steam.
If you use an oven for heating plastics, be careful with "Local" heat - as by way of being too close to the heating device,
that can "Boil" then burn the material.
Mr D |
|
Back to top |
|
|
richard vankoghnett
Joined: 18 Jan 2019 Posts: 3 Location: Fort Erie, Canada
|
Posted: Sat Jan 19, 2019 20:43 Post subject: |
|
|
O boy well i hope it is flat or flat will work then. Had a friend years ago that was making ATV windshields, thought he had made a wood buck covered with felt. then sheet of plastic and into the oven. he went broke so guess i should not have learned from him. Thanks Richard |
|
Back to top |
|
|
Lewis Site Admin
Joined: 25 May 2006 Posts: 16296 Location: Huddersfield
|
Posted: Sun Jan 20, 2019 2:55 Post subject: |
|
|
richard vankoghnett wrote: |
thought maybe there is a used place to get one. they must be too old and rare |
The main difficulty there is that they are not made by Mitsubishi. An independent company buys the cab/ rolling chassis and then does the coachwork and interiors. You could try sourcing one from the manufacturer, in Japan, but Yoza's suggestion is probably the best. :D
Club member Ho55, in the Isle of Man, has one, but hasn't been on the website for quite a long time. _________________
Copyright is retained for all my photos. Please don't copy them without asking permission
Do not blindly go where the path may lead you. Go where there is no path and leave a trail that others may follow!
ルイス |
|
Back to top |
|
|
andyman
Joined: 08 Dec 2012 Posts: 5602 Location: Penrith
|
Posted: Tue Jan 22, 2019 0:39 Post subject: |
|
|
The best way to cut acrylic is with a laser cutter - if you can find one locally, and depending on the size of your window. Most school models will take 900 x 600mm, some,1000 x 750mm. You'll need to use a compatible design package to draw the exact shape you need, that would take an experienced designer about 5 mins to draw and not much longer to cut. No danger of stress cracking or scratching with swarf. _________________ Andy C L300 Super Exceed - over 100 smiles per gallon! |
|
Back to top |
|
|
PinkPig Lifetime member
Joined: 05 Aug 2004 Posts: 2720 Location: Southampton, UK
|
|
Back to top |
|
|
Deker
Joined: 08 Mar 2008 Posts: 3833 Location: Borehamwood
|
Posted: Tue Jan 22, 2019 18:43 Post subject: |
|
|
andyman wrote: |
The best way to cut acrylic is with a laser cutter - No danger of stress cracking or scratching with swarf. |
A Bandsaw works very well, I know, do it quite often. Keep the paper backing on the plastic, will protect the surface.
Mr D |
|
Back to top |
|
|
|